How to Make Kick Scooter Faster| 12 Speed Hacks

I’ll reveal how to enhance and modify your kick scooter to make it go quicker as an expert rider. Find out how to make kick scooter faster, and increase your speed, performance, and maneuverability. Take your scooter to the next level by upgrading it.

Do you want to set a higher standard for your kick scooter skills? Want to fly past your buddies while feeling the wind in your hair? Look nowhere else! I’m going to teach you how to make kick scooter faster because I’m an experienced rider.

When it comes to making your kick scooter go faster, it’s all about preparation and maintenance. Check the tires periodically if they need pumping up; check the brake pads for wear; make sure you properly lubricated the bearings, inspect components regularly for any signs of damage or wear, and make sure you keep up with regular tune-ups so you don’t run into any unnecessary issues while riding. Following these few simple steps can help to make your scooter go faster on a consistent basis as well as enhance your overall riding experience!

How Fast Can a Kick Scooter Go

How fast can a kick scooter go? It depends on the type of kick scooter and the modifications made to it. Without any modifications, kick scooters can typically reach speeds of 6-12 miles per hour (mph), with the average speed being around 8 mph. However, there are ways to make kick scooters faster.

Kick Scooter Speed	Description
6-7 mph	Sustainable speed for most riders on smooth and flat ground
10 mph	Average speed of a kick scooter
12.5 mph	Average speed you can ride a kick scooter, depending on your riding style and the type of scooter you own
15 mph	Average top speed for most kick scooters commercially available
19 mph	Top speed reached by an athletic rider on a Boardy kick scooter with 12″ pneumatic tires
20 mph	Average top speed for most electric scooters commercially available
30 mph	Maximum speed of high-powered electric scooters

The top Kick Scooter speed can be up to 17 mph with some of these modifications. We should note that these changes will also affect its handling and require rider proficiency before attempting higher speeds safely.

Also, check if there are any local laws or regulations regarding how fast you are allowed to go on a kick scooter in your area; this may limit your potential speed regardless of any modifications you make.

Ultimately, it’s important for all riders to remain safe while riding their kick scooters regardless of their top-end speed. Be sure to follow all manufacturer guidelines and adhere to local laws when determining how fast you can ride safely on your kick scooter.

Read about Kick Scooter vs Bicycle here.

How to Make Kick Scooter Faster

I’ll be imparting my know-how on how to enhance the performance, maneuverability, and speed of your scooter. You’ll discover insightful advice on how to make kick scooter faster and to improve the speed and effectiveness of your kick scooter, whether you’re a novice or an experienced pro. So let’s get going and transform your ride into a fast vehicle!

1. Choose the Right Type of Adult Kick Scooter

If you want to make your scooter go faster, it requires the right type of adult kick scooter. It is important to select the right type of kick scooter that can meet your kick scooter speed requirements and perform to your highest expectations. Some common types of adult kick scooters are freestyle, commuter, and electric scooter.

We typically use freestyle for stunts and tricks, while a commuter or electric model is more suited for everyday rides. I have explained the difference between kick scooters and stunt scooters here.

2. Upgrading Scooter Wheels

Many people wonder how to make kick scooter faster when taking into consideration that walking speeds are much slower. One of the ways to drastically increase the kick scooter speed is by upgrading its wheels or maintaining the air pressure on the wheels. Mobility scooters often have large wheels designed to absorb bumps in the road, but these may slow you down when riding fast. Specialized wheels which are lighter and reduce friction will improve acceleration and top-end speed, allowing you to zoom past pedestrians with ease.

Choosing the right kind of wheel depends on a couple of factors, such as rider height and weight as well as terrain type. For instance, smaller wheels with softer material grip better on surfaces like dirt and grass, whereas larger ones offer better stability at high speeds on paved surfaces. Make sure to do some research online or consult with a qualified technician regarding compatible sizes and materials before investing in new wheels for your scooter!

In addition to ensuring compatible sizing, make sure to check for a good suspension setup so you don’t compromise on control whilst striving for improved speed. Installing larger shock absorbers can help minimize vibrations and bumps at high speeds, making riding more enjoyable even when covering great distances quickly–something only achievable by properly adjusting your kick scooter’s wheel size.

3. Adjusting or Upgrading the Scooter’s Handlebars, Deck, and Frame

The handlebars, deck, and frame of a scooter all play a major role in determining how fast it can go. By adjusting or upgrading these components, you can make your scooter go faster and optimize it for a smoother ride.

If you have an adjustable handlebar stem height on your scooter, increasing it slightly could provide better leverage for steering as well as add to its overall speed. Additionally, swapping out existing hardware such as bearings and axles offers noticeable improvements in performance that may give your kick scooters an extra boost from time to time.

Finally; if you’re ready to take it up another notch; replacing your kick scooter deck with one made of carbon fiber is sure to put some more pep in its step! Carbon fiber is lightweight and offers high performance when coupled with large wheels due to decreased rolling resistance; which allows it to travel faster than usual without consuming more energy in doing so.

With these tips in mind, you’ll be able to make your kick scooter go as faster as they possibly can! Following these simple steps will enable you to get the most out of your ride while also ensuring safety at all times, so happy trails!

4. Reducing the Weight of the Scooter by Replacing Heavy Parts With Lightweight Alternatives

If you want to make your kick scooter go faster, one way to do it is by reducing the weight of the scooter by replacing heavier parts with lightweight alternatives. The things that contribute to speed are the load your scooter carries and its performance in terms of acceleration, top speed, and hill-climbing capacity. Weight affects all three aspects, so if you reduce it you can get a noticeable increase in speed.

Depending on how much you want to modify the kick scooter’s performance, you might choose to replace the handlebars or the saddle with lighter versions; refit plastic parts such as mudguards with high-tech composite materials; or reduce the number and weight of components, such as reflectors or carrying packs.

While these individual modifications can boost performance for maximum gains, it’s also important to examine how all these components interact in terms of shape and aerodynamics. Factors that would increase drag due to catching wind should be avoided too–typically this means staying away from bulky designs that can create turbulence rather than improving airflow around the scooter. Carrying out more detailed modifications like air filters or gear changes may also make your ride faster, but only if they’re done by someone with experience and expertise in the field.

The build quality, materials used, wheel size, suspension system, and deck width of the kick scooter all contribute to its total weight, which affects the overall speed you can achieve when riding. Generally, lighter models with bigger wheels tend to be faster than heavier models with smaller wheels. Overall, any modifications should aim at keeping as much of your current equipment as possible while making sure everything works within a harmonious balance for better overall speed and agility. With these steps taken, your ride will be able to push above what it was capable of before, making sure each journey is blisteringly swift!

Read about Best Kick Scooter Brands here.

5. Maintaining and Lubricating the Scooter’s Bearings

Maintaining and lubricating the bearings in your kick scooter is essential for keeping it running fast and efficiently. When the bearings become worn or dirty, they can create friction between the wheels and slows down the scooter, reducing its speed. Lubricating them regularly is the key to keeping your ride running smoothly and quickly.

Regular use of light oil on the scooter’s bearings will help keep them moving freely and reduce drag when accelerating, allowing you to reach higher speeds. Additionally, checking that the bearing spacers are not too tight or too loose will ensure optimal performance and optimal speed when riding your scooter.

It’s also important to clean any debris that may be caught inside of the bearings, as this can cause unnecessary friction that will affect a kick scooter’s acceleration. You should remove extra dirt or mud from the wheels after riding to prevent buildup from slowing down your speed over time. Finally, make sure you check all bolts for tightness on a regular basis, as this can affect how quickly your kick scooter accelerates when taking off from a standing start. This simple maintenance task will help keep you zipping along at top speeds!

6. Proper Kicking Technique (Kicking the Scooter Harder)

Making your kick scooter go faster is not as difficult as you might think. There are a few hacks that you can use to increase the speed of your ride without compromising the safety or durability of your scooter. The key is to master the proper kicking technique and use it in combination with the right speed hacks.

Kicking your scooter will make you more fit as kick scooter has many exercise benefits.

Kicking the scooter harder is one way to make it faster, but it should be done with care. You should experiment gradually by putting a bit more effort into each kick and increase intensity slowly over time as you get used to your scooter’s movements. It is not necessary to put in too much effort, as doing so might lead to sprains or other injuries.

In addition, try experimenting with small modifications, such as:

• Altering your kicks
• Changing the angle and positioning of your feet, etc.

One of the simplest tricks to make a kick scooter faster is to alternate your legs while riding. By alternating your legs, you can apply opposite forces and maximize the acceleration out of each power stroke, quickly increasing your top speed with minimal effort. It’s a technique that experienced riders have used for years, and it can drastically provide you with some extra momentum on longer rides.

These can all result in faster speeds if done correctly, so take the time and practice these adjustments before hitting higher speeds on the road or park. Kicks must always be level for safety reasons, slow down at curves and never try accelerating without wearing appropriate protective gear like helmets must also be taken into account when learning how to make kick scooter faster for optimal performance every time!

7. Adjusting the Scooter’s Alignment for Maximum Speed and Stability

For those looking to maximize their kick scooter speed, understanding how to adjust the scooter’s alignment is essential. Properly aligning the kick scooter will help ensure maximum speed and stability. The average kick scooter has a range of around 8-13 miles per hour, but with some know-how and adjustments, we can exceed this limit.

To adjust the alignment of your kick scooter for increased speed and stability, start by loosening the bolts located at each side beneath the footboard. By loosening these bolts, you allow for a slight rotation of your kick scooter frame, which allows for fine-tuning of its alignment. Make sure to do this in small increments as adjusting it too much may have unexpected results.

Once loose enough, a small tug on one side should show if your footboard needs to be rotated slightly in order to be better aligned with the front fork assembly. Adjusting it often takes trial and error until you get the right angle, that works best with your preferences but make sure that it’s not crooked or bent to one side as this can cause poor handling and make controlling it difficult when going at maximum speed. Tighten up all bolts securely before riding once you’re happy with the slight adjustments made, as leaving them too loose can cause more harm than good while riding quickly over rough terrain or knocking against solid objects such as curbs.

With the careful adjustment, you should feel comfortable that every ride you throw yourself into is balanced with confidence knowing that all components work together in harmony towards peak performance, offering an adrenaline rush like no other!

8. Improving Your Riding Technique and Posture for Increased Speed

Improving your form when riding is one of the best ways to make your scooter go faster without any extra parts or accessories. By making minor adjustments to the way you position yourself on the scooter, the rider can look at improving their posture to reduce drag and improve output.

One useful technique for increasing speed is pushing down on both handlebars and placing more weight on one foot than the other. This technique allows for improved steering control, which will increase acceleration by increasing surface area contact with the ground. Additionally, experimenting with different stances can also increase speed potential as certain body positions will be more effective over certain types of terrain or situations.

It’s also important to focus on shifting your body weight when cornering or turning while riding a kick scooter, as weight distribution directly affects acceleration and deceleration during complex maneuvers. Try practicing how much pressure needs to be applied when leaning into a turn in order to ensure optimal speed while maintaining control of the board at all times during turns. With practice, riders will quickly improve their handling abilities, leading to improvements in the overall speed capability of their scooters.

By focusing on improving riding techniques throughout all stages of motion while operating a kick scooter, riders are sure to notice an improvement in overall speed potential from taking into account elements such as positioning techniques, weight-shifting strategies and drag reduction methods that can all affect the performance of any given ride experience for safer operation and enhanced speeds!

9. Using the Right Terrain for Maximum Speed

The best way to make your kick scooter faster is by understanding the different terrains and choosing the most suitable one for maximum speed. When scooting, it’s important to consider road conditions, as some will offer more traction and grip than others. Slippery roads can cause your scooter to skid and slow down, so avoid these areas if you’re looking for a speedier ride. Opt for dry roads whenever possible, as these surfaces offer more control.

In the same vein, bumps or obstacles can slow you down if you attempt to go over them with a kick scooter. Look for smooth roads with minimal dips and hills which can help your wheels roll faster and enable you to travel at higher speeds. When riding on an incline, start off in low gear and then quickly switch gears to maintain momentum while climbing the hill. If there are any descents along the way, use them wisely by pushing off in high gear so that you achieve greater acceleration as soon as you start going downhill.

Knowing and finding the ideal terrain for making your kick scooter go faster is key here:

• Technical trails can make it difficult if not impossible due to their tight turns, hills, rocks, or roots.
• Paved trails are more suited since they provide a smooth surface.
• Finally, groomed ground like dirt jumps could be fast, providing you have mastered technique during take-off.

If tempting rough terrain like grassy areas seems appealing but could present braking issues, it might be best avoided–this would mean slowing down instead of picking up speed! Keeping these things in mind will help improve your overall performance on a kick scooter, which ultimately leads to improved velocity!

10. The Impact of Wind Conditions and Finding Ways to Minimize Wind Resistance

Making a kick scooter faster will depend on various factors, such as wind conditions and the rider’s technique. The wind has a significant impact on speed and minimizing its resistance can drastically improve performance.

One way to reduce wind resistance is by using aerodynamic products, such as handlebars that are designed to fit closely over your body while ensuring the maximum profile of airflow. This will help minimize drag created by crosswinds and allow riders to move faster than their traditional setup. Also, ensure that any additional accessories are secured so they do not create extra drag when thrown into the wind stream.

As such, these small steps towards efficiency can still deliver significant gains in speed improvement with additional practice too!

11. Wear Lightweight Shoes with Good Grip

For those looking to make a kick scooter faster, wearing lightweight shoes with good grip can go a long way. This helps in transferring as much of your propulsion energy as possible onto the scooter instead of being lost on the way. Not only does this help you obtain that extra speed boost you were looking for, but it also enhances your ride comfort.

Having lightweight shoes that provide good traction gives you the greatest return on energy investment possible, allowing you to move quickly while preserving your comfort levels. Shoes or sandals made from synthetic materials are usually lighter than sneakers or leather shoes, so choose this if possible. Additionally, lightweight and lace-free designs allow for the best breathability paired with greater flexibility and movement control when scootering.

Finally, opt for soles that are firmly gripping and easy to wobble on. When riding a kick scooter at its fastest speed, it is important to have a firm grip on the ground for maneuverability and control. Properly supporting yourself with lightweight non-stiff footwear is an essential element of improving kick scooters’ speed as well as stability.

12. Buy an electric scooter to go faster

For the speed enthusiast, having the fastest kick scooter available is a must! If you’re looking to make your ride faster without having to buy an expensive, brand-new electric scooter, then an electric conversion can be a great option. This is a process where you replace the traditional metal parts of your kick scooter with parts that are powered by electric motors. This allows for significantly increased speed and power that only an electric scooter usually can provide.

Doing an electric conversion on your kick scooter is not as hard or expensive as it may seem and can actually be done with minimal mechanical know-how. As long as you have access to the necessary parts, such as an electric motor and a few other components, it’s relatively simple to do yourself. It’s important to note though that once you have made this modification to your scooter, it is illegal in most countries to ride your vehicle on public roads or sidewalks because of its increased speed.

Before attempting any build changes or modifications to your vehicle, I strongly suggest consulting with an expert first. Improperly modifying a kick scooter can result in unexpected damage or injury, so proceed with caution! Consider these speed hacks before attempting anything drastic–They could help you get the most out of your ride with minimal risk!

If you need the best pro scooters for tricks, you may have a look at my article.

Frequently Asked Questions